Table of Contents
Advertisement
49-2570.fm Page 19 Wednesday, August 18, 1999 3:59 PM
MOUNTING ACCESSORIES
MOUNTING THE DOOR/
WINDOW SENSOR
TRANSMITTERS
You can install any combination of
door/window sensor transmitters (Cat.
No. 49-2585) and motion detectors
(Cat. No. 49-2589), in up to 16 zones.
Follow these steps to mount each
door/window sensor transmitter.
1. Set the
DELAY
window sensor transmitter to
to protect a window or to
protect a door.
+
– –
–
+
Note: The
MAX
arm a sensor transmitter with a
60-second exit delay and a 30-
second entry delay (see "Instant/
Delay Mode"). When set to
the sensor transmitter immedi-
ately triggers the alarm if it is trig-
gered after the exit delay.
2. Select a location for the door/win-
dow sensor transmitter. We rec-
ommend
that
enough sensor transmitters to
protect the front and back door
and any windows that are hidden
from view or easily accessible
(including basement windows).
switch on the door/
MIN
to
MAX
DELAY
MAX
MIN
TEST
setting lets you
,
MIN
you
purchase
3. The supplied sensor transmitter
and magnet switch are connected.
If the wire is too long, shorten it by
cutting it to the length required,
stripping the ends, and reconnect-
ing it to the magnetic switch.
4. Remove the sensor transmitter's
batteries and attach it to the wall
using the supplied screws or dou-
ble-sided tape (such as Radio
Shack Cat. No. 64-2361). Then
replace
the
batteries
removed them) and close the bat-
tery compartment door.
5. Align the arrows on the switch and
magnet, then install the switch
and magnet using the supplied
screws or double-sided tape.
WIRELESS SENSOR TRANSMITTER
Notes:
• Do not mount the magnet
directly onto a metal surface. If
necessary, use a wood or plas-
tic spacer.
(if
you
19
Advertisement
Table of Contents
