Selecting An Outgoing Message; Recording An Outgoing Message - Radio Shack TAD-727 Owner's Manual

43-727.fm Page 23 Monday, December 20, 1999 4:28 PM
Notes:
• If you make an error, the TAD beeps
rapidly 3 times. Repeat Steps 1–7.
• Press each button within 30 sec-
onds of the previous button press. If
you take longer, the setting proce-
dure is canceled automatically.
• When you have an incoming call or
paging from the base while setting
the day and time, the setting proce-
dure is canceled.
• If there is a power failure,
flashes on the digital display when
power returns. Reset the day and
time.
SELECTING AN
OUTGOING MESSAGE
The TAD has two prerecorded messag-
es. One asks the caller to leave a mes-
sage ("Hello, no one is available to take
your call. Please leave your message af-
ter the tone."), the other is an announce-
ment and does not let the caller leave a
message ("Hello, no one is available to
take your call."). You can also record
your own message (see "Recording an
Outgoing Message").
Use the switch to select which
REC TIME
message you want. When you set it to
either 1 or 4 (minutes), the normal mes-
sage is selected and the TAD records
each incoming message for 1 or 4 min-
utes. When you set it to
announce-only message is selected.
RECORDING AN
OUTGOING MESSAGE
You can record your own message up to
1 minute long for the caller to hear when
the TAD answers a call. You can use ei-
ther the base or the handset to record
the message.
Hints:
• Do not tell callers that you are not
PF
• When you record an announce-
Follow these steps to record your outgo-
ing message.
1. Hold down
, the
ANS. ONLY
home. Instead, say that you cannot
come to the phone right now.
ment-only message, be sure that
the caller understands he or she
cannot leave a message.
OGM REC
for about 2 seconds until a beep
sounds. The digital display begins
counting up by second (
02 - - - -). Then speak your outgoing
message into the base.
on the base
- -
00 01
OGM REC
23