Selecting The Message Record Time - Radio Shack 43-3856 Owner's Manual

2. Press
/VOL/SEL
desired ring time appears.
3. Press to select the new ring time. You hear
SET
a confirmation tone. Then the announcement
"Ring time" and the new ring time is
announced. After a few seconds, the system
announces "To set record time, press menu
again".

Selecting the Message Record Time

You have three record time options. The options
" minute" or "
one four
recording the incoming messages. "
answers the call with the preset greeting or your
personal greeting but prevents the caller from
leaving a message.
1. Press
MENU/CLOCK
mode.
You hear "Record time" and the current
recording time ([ ] one minute, [ ] four
minutes, [ ] Announce only, No recording),
and it is displayed on the base. Then you hear
the guidance for setting the record time.
2. Press
/VOL/SEL
desired time appears.
3. Press to select the new recording time.
SET
You hear a confirmation tone. Then the
announcement "Record time" and new
recording time is announced. After a few
seconds, the system announces "To set
message alert, press menu again".
or until the
/VOL/SEL
minutes" set the duration for
Announce only
four times in standby
or until the
/VOL/SEL
"
19