Using Redial; Using Flash; Using Tone Services On A Pulse Line - Radio Shack ET-598 Owner's Manual

43-698a.fm Page 20 Friday, August 13, 1999 12:56 PM

USING REDIAL

lets you quickly dial the last
REDIAL/P
number dialed on either LINE 1 or
LINE 2. When you hear a dial tone,
simply press REDIAL/P
Notes:
• The redial memory is indepen-
dent for each keypad. You can-
not redial a number you dialed
on the handset keypad using
on the base keypad,
REDIAL/P
and vice versa.
• The redial memory holds up to
32 digits, so you can redial long-
distance as well as local num-
bers.
• The redial memory also holds
pause entries. See "Entering a
Pause" on Page 23.
• The redial memory does not store
a flash entry or any digits you
press after
FLASH
Flash").
20

USING FLASH

FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
.
For example, if you have Call Waiting,
press
call without disconnecting the current
call. Press
first call.
Note: If you do not have any special
services, pressing
connect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
(see "Using
performs the electronic equiva-
to answer an incoming
FLASH
FLASH again to return to the
FLASH
1. Be sure P T is set to
2. Dial the service's main number.
might dis-
P .