Table of Contents
Advertisement
43-738.fm Page 17 Friday, August 13, 1999 1:51 PM
Notes:
• Do not press
FLASH
the phone.
• The redial memory does not store
a
entry or any digits you
FLASH
pressed after
FLASH
• If you do not have any special
phone services, pressing
might disconnect the current call.
USING REDIAL
To quickly redial the last number di-
aled, press
PAUSE/REDIAL
handset when you hear a dial tone.
The phone automatically dials the last
number dialed.
Notes:
• The redial memory holds up to 40
digits, so you can redial long-
• The redial memory also holds
• If you have pulse service, we rec-
to hang up
.
FLASH
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
on the
these special tone services by follow-
ing these steps.
1. Be sure
2. Dial the service's main number.
3. When the service answers, press
4. After you complete the call, return
distance as well as local phone
numbers.
pause entries. See "Storing a
Pause" on Page 20.
ommend that you do not use the
redial feature for numbers that
include a tone change entry, be-
cause the one-second pause fol-
lowing the mode change might not
be long enough to allow the spe-
cial service to answer. See "Using
Tone Services on a Pulse Line."
on the back of the
DIAL
base is set to
.
PULSE
on the handset. Any addi-
TONE/#
tional numbers you dial now are
sent as tone signals.
the handset to the cradle or press
. The phone automatically
TALK
resets to the pulse mode.
17
Advertisement
Table of Contents
