Adjusting The Handset's Volume; Changing Channels; Using Redial - Radio Shack 43-3505 Owner's Manual

43-3505.fm Page 16 Monday, August 7, 2000 4:58 PM
• If interference is severe, the handset might lose communica-
tion with the base and the call might disconnect. If this hap-
pens, return the handset to the base for about 5 seconds to
reset the security access-protection code.

Adjusting the Handset's Volume

To adjust the handset's volume, repeatedly press
9 9 9 9
during a call until the sound level is comfortable. The volume
remains set even after you hang up.
Note: The handset beeps 3 times when you reach the lowest or
highest volume level.

Changing Channels

Every time you press
TALK
clear channel it uses for communication between the handset and
the base. If you hear interference during a call, repeatedly press
to change the channel until you get a clear one.
CH

Using Redial

To redial the last number dialed, press
You can also redial a busy number quickly without hanging up the
phone. Press . You hear a dial tone then the phone auto-
REDIAL
matically redials the number.
Notes:
• The redial memory holds up to 32 digits, so you can redial
long-distance as well as local numbers.
VOLUME
, the phone automatically selects a
then
TALK REDIAL/PAUSE
16
8 8 8 8
or
.