Placing The Base On A Desk Top - Radio Shack ET-598 Owner's Manual

43-698a.fm Page 7 Friday, August 13, 1999 12:56 PM
Placing the Base
on a Desk Top
Follow these steps when you place
the base on a desk, shelf, or table.
1. If you have a single 2-line modular
jack, plug one end of the supplied
modular cord into the
jack.
Note: When you make this con-
nection, you should not connect
another modular cord to the
jack or phone operation will
LINE 2
be erratic.
If you have two separate 1-line
modular jacks, plug one end of the
supplied modular cord into the
jack and plug an-
TEL LINE 1/2
other modular cord (not supplied)
into the
TEL LINE 2
TEL LINE 1/2
TEL
jack.
If you have only a single 1-line
modular jack, plug one end of the
supplied modular cord into the
jack to use line 1, or
TEL LINE 1/2
into the
TEL LINE 2
line 2.
2. Plug the supplied AC adapter's
barrel plug into the
3. Route the adapter's cord through
the strain relief slot.
Strain Relief Slot
4. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
jack to use
jack.
DC IN 9V
7