Using The Paging/Intercom Features - Radio Shack ET-598 Owner's Manual

43-698a.fm Page 21 Friday, August 13, 1999 12:56 PM
3. When the service answers, press
. Any additional numbers
TONE/
you dial are sent as tone signals.
4. After you complete the call, return
the handset to the base, and
press on the handset or
TALK
on the base. The phone
SPEAKER
automatically resets to the pulse
mode.
USING THE PAGING/
INTERCOM FEATURES
You can use the ET-598 as a two-way
pager and intercom between the base
and the handset. This is useful if the
handset is away from the base and you
want to locate it, or if you want to have
a conversation between the handset
and the base.
To page the base or handset, press
. Both the base and the hand-
TERCOM
set ring.
To answer the page, press
(on the handset) or
TERCOM
or
INTERCOM
the intercom call, press
or
SPEAKER
set or the base) or hang up the hand-
set.
During a call, you can page someone
at either the base or the handset to join
the conversation. Press
The current call is put on hold. When
the person at the base or handset an-
swers, tell them to press
once to end the intercom call
TALK
then to join the conversation.
CONF
Notes:
• The intercom does not operate if
the called party is on a call.
• If a call comes in during an inter-
com conversation, either of the
IN-
intercom parties can answer the
call as they normally would. Press
on the handset or
TALK
on the base once to end the inter-
com call, then press
SPEAKER
incoming call.
or
TALK
SPEAKER
(on the base). To end
TALK
(on the hand-
INTERCOM
INTERCOM
SPEAKER
SPEAKER
TALK
again to receive the
IN-
or
.
or
or
21