Storing Your Area Code - Radio Shack ET-1102 Owner's Manual

43-1102.fm Page 13 Tuesday, August 17, 1999 4:37 PM
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see "Dialing Numbers from a
Caller ID Record" on Page 21) or to cor-
rectly store a number from a record into
a memory dialing location (see "Storing
a Caller ID Record to Memory" on
Page 21), you must store your local area
code in the ET-1102's memory. Then,
when you dial from a Caller ID record,
the ET-1102 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and press
.
TION
1. Press 3 (or t twice) to select
Code .
2. Press , then enter your 3-
SELECT
digit area code. If you make a mis-
take, repeatedly press
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display
when you press
the area code, press
times. Then enter your area code.
FUNC-
Area
or to
. To delete
SELECT
DELETE three
3. Press to store the area
SELECT
code, then press
FUNCTION
turn the handset to the base to clear
the display.
or re-
13