Storing Your Area Code - Radio Shack ET-1123 Owner's Manual

43-1123.fm Page 11 Tuesday, September 5, 2000 11:13 AM
1. Lift the handset and hold down
until Caller ID setup menu
CALL ID
appears with
Auto Talk
9 9 9 9
2. Press or
2
(Caller ID/Call Waiting).
3. Press to change the Caller
SELECT
ID/Call Waiting setting.
appears indicating the selected set-
ting.
4. Press then return the hand-
CALL ID
set to the base to store the new set-
ting.
STORING YOUR AREA
CODE
By storing your local area code in the
phone's memory, the area code does
not appear in the Caller ID record dis-
play if it matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and hold down
until Caller ID setup menu
CALL ID
appears with
Auto Talk
9 9 9 9
2. Press (or twice) to select
3
Code .
3. Press , then enter your 3-
SELECT
digit area code. If you make a mis-
take, repeatedly press
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
three times. Then enter your new
area code.
selected.
to select CIDCW
or
On Off
selected.
Area
6 6 6 6 7 7 7 7
or to
DEL/CH
4. Press , then press
SELECT
and return the handset to the base
cradle to store the new setting.
Note: In some areas, the area code is
necessary even for a local call. If you
live in such an area, do not enter the
area code.
CALL ID
11