Setting Auto Talk; Turning Call Waiting/Caller Id On/Off; Storing Your Area Code - Radio Shack TAD-729 Owner's Manual

SETTING AUTO TALK

Your phone is preset so you must press
to answer a call. With auto talk
TALK
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and hold down
until Caller ID Setup
CALL ID
appears on the display with
selected.
Talk
CALL ID
SELECT
2. Press to change the auto
SELECT
talk setting. or
On
cating the selected setting.
3. To clear the display when you finish,
press or return the handset
CALL ID
to the base.
TURNING CALL WAITING/
CALLER ID ON/OFF
If you have Call Waiting with Caller ID
service, you can set the TAD-729 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
14
Auto
appears indi-
Off
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and hold down
until Caller ID Setup
CALL ID
appears on the display with
selected.
Talk
2. Press or to select
2
(Caller ID/Call Waiting).
3. Press to change the Caller
SELECT
ID/Call Waiting setting.
appears indicating the selected set-
ting.
4. Press then return the hand-
CALL ID
set to the base to store the new set-
ting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see "Dialing Numbers from a
Caller ID Record" on Page 26) or to cor-
rectly store a number from a record into
a memory dialing location (see "Storing
a Caller ID Record to Memory" on
Page 26), you must store your local area
code in the TAD-729's memory. Then,
when you dial from a Caller ID record,
the TAD-729 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and hold down
until Caller ID Setup
CALL ID
appears on the display with
selected.
Talk
Auto
CIDCW
On or Off
Auto