Storing Your Area Code - Radio Shack ET-1119 Owner's Manual

43-1119.fm Page 12 Thursday, September 16, 1999 1:58 PM
2. Press to select
ID/Call Waiting).
3. Press to change the Caller
SELECT
ID/Call Waiting setting.
appears indicating the selected set-
ting.
4. Return the handset to the base to
store the new setting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see "Dialing Numbers from a
Caller ID Record" on Page 21) or to cor-
rectly store a number from a record into
a memory dialing location (see "Storing
a Caller ID Record to Memory" on
Page 20), you must store your local area
code in the ET-1119's memory. Then,
when you dial from a Caller ID record,
the ET-1119 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and press
.
TION
2. Press twice to select
Code .
12
(Caller 3. Press
CIDCW
On or Off
4. Press
FUNC-
Area
, then enter your 3-
SELECT
digit area code. If you make a mis-
take, repeatedly press
or to move the cursor
FLASH
over the incorrect digit, then enter
the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
three times. Then enter your area
code.
to store the area
SELECT
code, then press
FUNCTION
return the handset to the base to
clear the display.
REDIAL
DELETE
or