Network; Network Services; Dyndns - Bosch MIC IP starlight 7000i User Manual

50 en | Network
9

Network

The settings on these pages are used to integrate the device into a network. Some changes
only take effect after a reboot. In this case Set changes to Set and Reboot.
1.
2.
The device is rebooted and the changed settings are activated.
9.1

Network Services

This page shows an overview of all available network services. Use the checkbox to activate or
deactivate a network service. Click on the settings symbol next to the network service to go to
the settings page for this network service.
Select the appropriate network services from the list on the page:
–
–
–
–
–
–
–
–
–
–
–
–
–
9.2

DynDNS

Enable DynDNS
DynDNS.org is a DNS hosting service that stores IP addresses in a database ready for use. It
allows you to select the camera via the Internet using a host name, without having to know the
current IP address of the unit. You can enable this service here. To do this, you must have an
account with DynDNS.org and you must have registered the required host name for the unit on
that site.
Notice!
Information about the service, registration process and available host names can be found at
DynDNS.org.
Provider
The value in this field defaults to dyndns.org. Select another option as necessary.
Host name
Enter the host name registered on DynDNS.org for the camera here.
User name
Enter the user name you registered at DynDNS.org here.
Password
Enter the password you registered at DynDNS.org here.
2017.11 | 1.2 |
Make the desired changes.
Click Set and Reboot.
HTTP
HTTPS
RTSP
RCP
FTP
SNMP
ISCSI
UPNP
NTP Server
Discover
ONVIF Discover
GB/T 28181
Password reset mechanism
User Manual
MIC IP starlight 7000i
Bosch Security Systems