Storing Your Area Code - Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID Owner's Manual

3. A menu appears with
9 9 9 9
Press / to select
CONF
press / to change the setting.
SELECT CH
Ed Ed Ed Ed E\\ E\\ E\\ E\\
or appears indicating the selected
setting.
4. Press / and return the handset
CID HOLD
to the base to store the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone's Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store it in memory),
you can add it afterwards. See "Adding/De-
leting the Area Code" on Page 25.
Note: If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.
Follow these steps to store your area code.
1. Lift the handset and hold down
9Wbb[h 9Wbb[h 9Wbb[h 9Wbb[h ?: ?: ?: ?: I[jkf I[jkf I[jkf I[jkf
until
HOLD
B_d[ ' ' ' ' B_d[ B_d[ B_d[
display with selected.
6 6 6 6
2. Use / / or
TONE #
B_d[ ( ( ( ( B_d[
B_d[ B_d[
. Then press
CONF
3. A menu appears with
9 9 9 9
Press / twice to select
CONF
then press /
SELECT CH
4. Enter your three-digit area code. If you
make a mistake, repeatedly press
6 6 6 6 7 7 7 7
/ or / to move the cursor
TONE #
over the incorrect digit, then enter the
correct number.
Note: If an area code is already stored,
it appears on the display. To delete the
area code, press
DEL
then enter your area code. Or you can
6 6 6 6
use / / or /
TONE #
sor and edit the area code.
7kje 7kje JWba 7kje 7kje JWba JWba JWba
selected.
9?:9M 9?:9M
9?:9M 9?:9M
, then
/
CID
appears on the
7 7 7 7
B_d[ B_d[ ' ' ' ' B_d[ B_d[
/ to select or
9 9 9 9
/ .
7kje JWba 7kje JWba
7kje 7kje JWba JWba
selected.
7h[W 9eZ[ 7h[W 9eZ[
7h[W 7h[W 9eZ[ 9eZ[
,
.
/
/ three times,
VOL
7 7 7 7
to move the cur-
Installation
5. Press / to store the area
SELECT CH
code, then press
CID
the handset to the base to store your
new entry.
/ and return
HOLD
15