Basic Operation; Using The Speakerphone - Radio Shack ET-469 Owner's Manual

Two-line speakerphone with line status indicators
Table of Contents

Advertisement

43-469.fm Page 12 Tuesday, January 19, 1999 9:48 AM

BASIC OPERATION

To make a call, pick up the handset and
select a line by pressing
When you hear the dial tone, dial the
2.
number.
Notes:
• The phone automatically selects the
free line if you do not press
.
LINE 2
• If you do not select a line before
picking up the handset, the free line
activates.
When you receive a call on a line, the in-
dicator for that line flashes and the
phone rings (if
RINGER
). To answer the call, press the ringing
HI
line's button (
or
LINE 1
up the handset.
To help you tell which line is ringing,
each line has a distinctive ring tone. Line
1has a higher tone than Line 2.
Note: Line 2 does not operate during a
power failure.
12
USING THE
or
LINE 1
LINE
SPEAKERPHONE
To make or answer a call using the
speakerphone, press
ER
the phone automatically selects a free
line or the line that is ringing.To make a
call or answer on the other line, press
the line's button
or
LINE 1
To end a speakerphone call, press
HEADSET/SPEAKER
dicator turns off.
Notes:
is set to
or
LO
) and pick
LINE 2
HEADSET/SPEAK-
. The SPEAKER indicator lights and
(LINE 1
. The SPEAKER in-
• If background noise interferes with
the speakerphone's operation, you
can press
PRIVACY
base's microphone while the other
party is speaking (see "Using Pri-
vacy" on Page 14).
• You cannot use the speakerphone
with a headset connected to the
phone (see "Connecting an Optional
Headset" on Page 18).
• You cannot use the speakerphone
during a power failure.
or
.
LINE 2)
to turn off the

Advertisement

Table of Contents
loading

Table of Contents