Table of Contents
Advertisement
43-469.fm Page 15 Tuesday, January 19, 1999 9:48 AM
2. Press
to put the first call on
HOLD
hold.
3. Press either
LINE 1
line not in use, then place a call to
another party.
4. After the second party answers,
press
. This connects all three
CONF
parties.
Note: To talk on only one line with-
out disconnecting the other line,
press
. Both lines' red indica-
HOLD
tors flash. Then, press the button for
the line you want to talk on. To
5. To end the conference call with both
USING TONE SERVICES
or
for the
ON A PULSE LINE
LINE 2
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Set
2. Dial the service's main number.
3. When the service answers, press
4. After you complete the call, hang
return to the three-way conversa-
tion, press
.
CONF
lines, hang up the handset.
To disconnect one line and continue
talking on the other, press either
or
.
LINE 1
LINE 2
/
(Tone/Pause) at the back of
T
P
the base to
.
P
. Any additional numbers you dial
are sent as tone signals.
up. The phone automatically resets
to the pulse mode.
15
Advertisement
Table of Contents
