Software Operation; Menu Bar - Extron electronics XTP T USW 103 4K User Manual

Software Operation

Menu Bar

The menu bar contains three menus for configuring software settings.
File menu
The
the program. To access the menu, click the
Figure 17.
Disconnect
This option disconnects the device from the XTP System Configuration Software.
From the
NOTE: If the device is already disconnected, the
Exit
This option disconnects the switcher from the software and closes the application.
From the
Tools menu
The
Tools
Figure 18.
NOTE: The
menu contains options for disconnecting from the switcher or receiver and exiting
File
File Menu
menu, select
File Disconnect
device is connected.
menu, select
File Exit
menu contains an option for updating firmware. To access this menu, click the
Tools
menu.
Tools Menu
Backup and Restore
available when the computer is directly connected to the device. See an XTP matrix
switcher user guide (www.extron.com) for more information on these features.
XTP T USW 103 4K Switcher • XTP System Configuration Software
menu.
File
. The
Connections
Disconnect
. The application closes.
and
Commissioning Report
screen opens.
option is disabled until a
options are not
31