Inputs and Output Connections
NOTES:
•
For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
3.5 mm Stereo Plug Connector
•
Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the device
(see
Analog audio input connector
A
analog stereo audio source to the 3.5 mm tip-ring-sleeve (TRS) jack.
3.5 mm Stereo Plug Connector
Figure 3.
By default, audio input is selected automatically (see
commands on page 21 to manually select audio inputs). When input 2 or 3 is
selected with automatic audio input selections, the switcher prioritizes embedded digital
audio. The table below shows the audio format that is sent over the XTP connection
when a specific audio format is not specified.
Selected
Video Input
HDMI or DP
HDMI or DP
HDMI or DP
HDMI or DP
Analog video input connector
B
connector, labeled input 1. It accepts RGBHV video signals.
HDMI input connector
C
connector, labeled input 2. It accepts HDMI, DVI (with an appropriate adapter), or dual
mode DisplayPort video sources.
DisplayPort input connector
D
DisplayPort connector, labeled input 3.
HDMI output connector
E
connector for a local display of the selected input.
RCA Connector
Tip (+)
Ring (-)
Sleeve ( )
(balanced)
HDMI Connection
on page 10).
Tip (L)
Ring (R)
Sleeve ( )
Wiring for the Analog Audio Connector
(unbalanced)
Default Audio Priorities
Digital Embedded
Audio Present
VGA
N/A
VGA
N/A
Yes
Yes
No
No
— Connect a digital video source device to the female HDMI
— Connect a digital video source device to the female
— Connect a digital video display to the HDMI output
(see figure 2 on the previous page) — Connect an
Audio input selection
Analog Audio
Audio Sent Over XTP or
Present
to the Local HDMI output
Yes
No
No
Yes
Yes
No
— Connect a video source to the 15-pin HD
XTP T USW 103 4K Switcher • Installation
SIS
Analog audio
No audio
Digital embedded audio
Digital embedded audio
Analog audio
No audio
6