Dubbing A Cd From A Selected Track To The Last Track; Basic Recording - Radio Shack CD Player User Manual

• After dubbing, if a program is stored,
both g of the PLAYBACK tray and g /
of the RECORD/PLAYBACK
ENTER
tray allow you to play the programmed
tracks.
Dubbing a CD from a Selected
Track to the Last Track
Instead of dubbing the entire source disc
from the beginning to the end, you can dub
tracks from a selected track to the last track.
You can select from the first track to the last
track so the CD recorder dubs all the disc
yet it does not finalize the disc in the
RECORD/PLAYBACK tray at the end of the
dubbing.
1. In the stop mode after installing discs,
select the track you want to start from.
2. Press
DUBBING MODE
dubbing speed then press g /
3. At the end of the dubbing,
WRITE then COMPLETE
4. Repeat Steps 1–3 above if you want to
dub additional tracks.

Basic Recording

This section describes the basics of
recording from external sources.
1. Set a recordable CD-R/RW disc in the
RECORD/PLAYBACK tray. When a
blank disc is set in the RECORD/
PLAYBACK tray,
BLANK
2. Select the source to be recorded. Every
to select a
3. Adjust the recording level. See "Setting
.
ENTER
PMA
4. Select the mode of track number
appears.
5. Press
6. Press g /
appears.
7. Press
time you press
INPUT SELECTOR
input changes as follows:
DIGITAL OPTICAL
and DIGITAL light at the right of the
peak level meter): use to record from a
source connected to the
( ) terminal.
OPTICAL
DIGITAL COAXIAL
and COAXIAL light at the right of the
peak level meter): To record a source
connected to the
DIGITAL IN
( ) terminal.
COAXIAL
ANALOG ( ANALOG lights at the right
of the peak level meter): use to record
from a source connected to
jacks.
Note: If you select a digital input which
is not connected to the CD recorder,
D-UNLOCK briefly appears.
the Recording Level" on Page 24.
assignment by pressing
AUTO/
. See "Assigning Track
MANUAL
Numbers to Recordings" on Page 25.
. BUSY then
RECORD
appears. The CD recorder enters record
†
pause mode. and REC
of the RECORD/
ENTER
PLAYBACK tray to start recording. Play
the source to be recorded.
If the CD recorder detects copy-prohibit
signals during recording,
COPY appears and recording stops.
†
to temporarily pause recording.
To restart recording, press g /
, the
( OPTICAL
DIGITAL IN
( DIGITAL
LINE IN
READY
flashes.
CAN'T
.
ENTER
23