Using Repeat Play; Programming Tracks; Cd And Cd Player Tips - Radio Shack 14-518 Owner's Manual

14-518.fm Page 7 Tuesday, October 10, 2000 11:31 AM

USING REPEAT PLAY

The system lets you continuously repeat a
single track, all tracks on a CD, or an entire
programmed sequence of tracks.
To continuously repeat a single track, press
once so the repeat indicator in front
REPEAT
of the right digit of the track number flashes.
To continuously repeat all tracks on the CD,
press twice so the repeat indicator in
REPEAT
front of the track number lights.
To continuously repeat an entire pro-
grammed sequence, first program the tracks
you want to play (see "Programming
Tracks"), press then
the repeat indicator lights.
To cancel repeat play during play, repeatedly
press until the indicator turns off.
REPEAT
The CD player resumes normal play.
The repeat indicator remains lit after
pressed. To cancel repeat play when the CD
is stopped, press .again or

PROGRAMMING TRACKS

You can program the system to play up to 16
tracks in any order you choose, and you can
program the same track to play more than
once.
Storing/Playing a Programmed
Sequence
1. With a CD loaded but not playing, press
. Pr flashes on the display
PROGRAM
and the FM ST./PROG indicator flashes.
2. Repeatedly press
until the desired track number
appears.
3. To store the selected track, press
. Pr flashes on the display and
GRAM
the FM ST./PROG indicator flashes.
twice, so
REPEAT
is
once.
REPEAT
.or
SKIP SKIP
PRO-
CD Player Operation
4. Repeat Steps 2–3 to store up to 16
tracks.
Note: If you try to store more than 16
tracks, the 17th track is not stored and
Pr flashes on the display.
5. Press . to play the programmed
tracks. The first programmed track num-
ber appears and the play/pause indica-
tor and the FM ST./PROG indicator
lights. The CD begins to play starting
with the first programmed track.
Reviewing a Programmed
Sequence
To review a programmed sequence, with
play stopped, press
PROGRAM
have stored all the tracks in the sequence).
Otherwise, press
PROGRAM
ST./PROG indicator flashes and the track
number of each stored track appears.
Erasing a Programmed Sequence
You can do any of the following to erase a
programmed sequence:
• Set to
FUNCTION
.
RADIO
• Open the CD door with play stopped.
• Press with play stopped.

CD AND CD PLAYER TIPS

Even though a compact disc is durable, treat
the CD surface with care.
• Do not write on either side of the CD,
particularly the non-label side. Signals
are read from the non-label side.
• Do not store CDs in high temperature,
high-humidity locations. They might
warp.
• Keep CDs dry. A water drop can act as a
lens and affect the laser beam's focus.
once (if you
twice. The FM
or
STD BY.TAPE
7