Mixing Recording; Time Display; Messages - Radio Shack CD Player User Manual

Note: You cannot select
analog recording.
appears, press g /
5. After READY
of the RECORD/PLAYBACK tray.
†
disappears, and REC
6. Start playing the source. The CD
recorder starts synchronized recording.
During digital recording, if the input
signal stops for 5 seconds, recording
stops. During analog recording, if the
input signal stops for 20 seconds,
recording stops.

Mixing Recording

You can mix the sound of an analog external
input and a CD placed in the PLAYBACK
tray on a CD-R/RW disc. For example, if you
have a microphone and its amplifier, you
can add narration to your CD. Or you can
mix the sound of your musical instruments
to your CD.
1. Connect the external analog source and
load the discs.
2. Record the external analog source and
then press g of the PLAYBACK tray.

Time Display

Press to switch the mode of the time
TIME
display. Each time you press
mode changes as follows:
In the Play/Pause Mode
• Elapsed time of the track being played.
for • Total elapsed play time of tracks.
SYNC-1
• Remaining time of the track being
ENTER
• Total remaining play time of tracks.
lights steadily.
• The total play time and the number of
In the Stop Mode
• The total play time and the number of
• Remaining recording time of the disc in
In the Recording Mode
• Elapsed recording time of the track
• Remaining recording time of disc.

Messages

BLANK
set on the tray.
CLOSE
COMPLETE
finalizing, or erasure has been completed.
DUBB 1X
the PLAYBACK tray to the RECORD/
PLAYBACK tray.
, the
TIME
DUBB 2X
PLAYBACK tray to the RECORD/
PLAYBACK tray.
played.
tracks.
tracks for both trays.
the record tray.
being recorded.
— A blank CD-R/CD-RW disc is
— Close the disc tray.
— Dubbing, recording,
— Normal speed dubbing from
— 2X speed dubbing from the
27