Table of Contents
Advertisement
Installing Batteries
Your CD recorder's remote control requires
two AA batteries (not supplied) for power.
We recommend alkaline batteries, available
at your local RadioShack store, for the best
performance and longest life.
Cautions:
• Always use fresh batteries of the
required size and recommended type.
• Do not mix old and new batteries,
different types of batteries (standard,
alkaline, or rechargeable), or
rechargeable batteries of different
capacities.
1. Press down on the battery compartment
cover and slide it off in the direction of
the arrow.
2. Insert the batteries into the battery
compartment as indicated by the
polarity symbols (
+
inside.
3. Replace the cover.
When the remote control operates erratically
or does not work, replace the batteries.
Cautions:
• Never leave dead or weak batteries in
the remote control. Batteries can leak
chemicals that can corrode the remote.
and
) marked
–
• If you do not plan to use the remote
control for a month or more, remove
the batteries.
Using the Remote
For the best results, point the remote control
toward REMOTE SENSOR on the front of
the CD recorder.
13
Advertisement
Table of Contents
