Dubbing A Programmed Sequence - Radio Shack CD Player User Manual

5. When the playback of the disc in the
PLAYBACK tray ends, the CD recorder
stops recording, finalizes the disc, and
stops. PMA WRITE
FINALIZE , COMPLETE
takes about 1 minute to finalize the
disc.
Notes:
• If the CD-R/RW disc set in the
RECORD/PLAYBACK tray does not
have enough space to dub the entire disc
set in the PLAYBACK tray,
SPACE:D briefly appears and then
2
DUBB 1/2/4X appears. It is possible
to dub a part of the disc. Press
DUBB 1/2/4X appears to select the
track to start dubbing, then press g /
.
ENTER
• When the disc reaches the end during
recording, the CD recorder starts a fade-
out over a few seconds. When the fade-
out has finished, the CD recorder
finalizes the disc automatically and
stops.
• Press D of the PLAYBACK tray or the
RECORD/PLAYBACK tray to stop
dubbing.
• Track numbers are automatically
incremented. During dubbing, you
cannot add track numbers manually.
• During dubbing, only D of the
PLAYBACK tray and the RECORD/
PLAYBACK tray work. When dubbing is
stopped by pressing D , the CD recorder
will not finalize the disc.
• If you set a CD-RW in the PLAYBACK
tray, the CD recorder automatically
disables 4X speed dubbing.
22
, COMPLETE ,
appears. It
NO
C
when
Dubbing a Programmed
Sequence
Notes:
• During 2X or 4X dubbing, you cannot
monitor the dubbing through the digital
outputs (optical and coaxial).
• To dub only one track, program the
track, then dub it. See "Dubbing a
Programmed Sequence".
• If you attempt to dub a disc that
contains an SCMS copy protection
appears. If you press g /
signal, SCMS
, ANALOG MODE
ENTER
the CD recorder records the entire disc
at 1X speed in analog mode. When the
recording finishes, the CD recorder
automatically finalizes the disc.
1. Program a sequence of tracks on the CD
in the PLAYBACK tray.
2. Press
DUBBING MODE
dubbing speed.
3. Press g /
.
ENTER
4. At the end of dubbing,
then appears. The CD
COMPLETE
recorder does not automatically finalize
the disc.
5. Repeat Steps 1–4 above if you want to
dub another sequence.
• You can use Program Dubbing in all
three dubbing speeds (1X, 2X, and 4X).
appears then
to select a
PMA WRITE