Names And Functions Of Parts - Konica Minolta CM-3700A Instruction Manual

Names and Functions of Parts

1
2
3
6
5
7
8
9
① Transmittance chamber ............................. Place the specimen in this chamber to perform
② Measurement port baseplate lock .............. Used to release the lock of the measurement port base plate.
③ Measurement port baseplate ..................... Can be opened check position of specimen for reflectance
④ Power switch .............................................. Used to turn power ON and OFF.
⑤ Sample holder ............................................ Used to hold the specimen, white calibration
⑥ Target mask ................................................ Select a suitable target mask (for 5×7mm (SAV), ø11mm
⑦ Transmittance specimen chamber cover .... Covers the transmittance specimen chamber when slid closed.
⑧ USB connection terminal ............................ Used to connect the instrument to a PC with the supplied USB cable
⑨ AC adapter input socket.............................. Used to connect the AC adapter supplied with the CM-3700A.
4
measurement of transmittance.
measurements.
plate or zero calibration box.
(MAV) and ø30mm (LAV) measurements) according
to the specimen and attach it to the CM-3700A.
(IF-A21 or IF-A22).
11