HP ProCurve 2910al Access Security Manual page 307

Hide thumbs Also See for ProCurve 2910al:

Table of Contents

Caution Regarding

the Use of Source

For more details on ACL planning considerations, refer to "Planning an ACL

Application" on page 9-24.

Source routing is enabled by default on the switch and can be used to override

ACLs. For this reason, if you are using ACLs to enhance network security, the

recommended action is to use the no ip source-route command to disable

source routing on the switch. (If source routing is disabled in the running

config file, the show running command includes "no ip source-route" in the

running-config file listing.)

IPv4 Access Control Lists (ACLs)

Show Quick Links

Table of Contents