Configuring And Assigning An Ipv4 Acl; Overview; General Steps For Implementing Acls - HP ProCurve 2910al Access Security Manual

IPv4 Access Control Lists (ACLs)

Configuring and Assigning an IPv4 ACL

C a u t i o n
R e g a r d i n g t h e
Use of IPv4
S o u r c e R o u t i n g
9-34

Configuring and Assigning an IPv4 ACL

ACL Feature
Configuring and Assigning a Standard ACL
Configuring and Assigning an Extended ACL
Enabling or Disabling ACL Filtering

Overview

General Steps for Implementing ACLs

1. Configure one or more ACLs. This creates and stores the ACL(s) in the
switch configuration.
2. Assign an ACL.
IPv4 source routing is enabled by default on the switch and can be used to
override ACLs. For this reason, if you are using ACLs to enhance network
security, the recommended action is to disable source routing on the switch.
To do so, execute no ip source-route.
Page
9-44
9-53
9-73