HP ProCurve 2910al Access Security Manual page 495

ProCurve(config)# show port-access authenticator 2-3
Port Access Authenticator Status
Port-access authenticator activated [No] : No
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Auth Unauth
Port Clients Clients
---- -------- -------- -------- ------ --------- ----------- ------ -----
2 1 0
3 1 0
Figure 12-10. Example of show port-access authenticator Command
Untagged Tagged
VLAN VLANs
1
1
The information displayed with the show port-access authenticator command
for individual (config | statistics | session-counters | vlan | clients) options is
described below.
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Kbps In
Port COS Limit
7 90
5 50
RADIUS Cntrl
ACL Dir
No In
Yes In
12-55