Overview Of Options For Applying Ipv4 Acls On The Switch - HP ProCurve 2910al Access Security Manual

Create a Standard,
Numbered ACL
or
Add an ACE to the End
of an Existing
Standard, Numbered
ACL
Use a Sequence
Number To Insert an
ACE in a Standard ACL
Use an ACE's
Sequence Number To
Delete the ACE from a
Standard ACL
Resequence the ACEs
in a Standard ACL
Enter or Remove a
Remark from a
Standard ACL
Delete a Standard ACL
1
The mask can be in either dotted-decimal notation (such as 0.0.15.255) or CIDR notation (such as /20).
2
The [ log ] function applies only to "deny" ACLs, and generates a message only when there is a "deny" match.
ProCurve(config)# access-list < 1-99 > < deny | permit >
< any | host <SA > | SA/< mask-length > | SA < mask >>
2
[log]
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-std-nacl)# 1-2147483647 < deny | permit >
< any | host <SA > | SA/< mask-length > | SA < mask >>
2
[log]
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-std-nacl)# no < 1-2147483647 >
ProCurve(config)# ip access-list resequence < name-str | 1-99 > < 1-2147483647 >
< 1-2147483646 >
ProCurve(config)# ip access-list standard < name-str | 1-99 >
ProCurve(config-ext-nacl)# [ remark < remark-str > | no < 1-2147483647 > remark ]
For numbered, standard ACLs only, the following remark commands can be
substituted for the above:
ProCurve(config)# access-list < 1 - 99 > remark < remark-str >
ProCurve(config)# [no] access-list < 1 - 99 > remark
ProCurve(config)# no ip access-list standard < name-str | 1-99 >
For numbered, standard ACLs, the following command can be substituted for the
above:
ProCurve(config)# access-list < 1 - 99 > remark < remark-str >
IPv4 Access Control Lists (ACLs)

Overview of Options for Applying IPv4 ACLs on the Switch

9-49
9-76
1
9-79
9-80
9-81
9-83
9-74
9-7