Graphical Interface Mode
Click the graphical interface enable button to switch to the graphical interface.
When the graphical interface is enabled, the display looks like the following two
figures. See "To switch between the graphical interface and full-screen mode"
on page 3-30.
Figure 3-17
Access the
Channel Setup
dialog box
Menu bar
Measurement
toolbar
(can be turned
off)
Infiniium Oscilloscope Top of Display in Graphical Interface Mode
Memory bar—
Turn this
Set vertical
channel
scaling
highlighted area shows
on or off
how much of
acquisition memory is
displayed on the screen
Using the Oscilloscope
Graphical Interface Mode
This button enables
the graphical
interface
Click here to set the
time and date
3-23