To Start And Stop Waveform Acquisition - Agilent Technologies 54831A User's Quick Start Manual

To start and stop waveform acquisition

• To start waveform acquisition, click the start button at the bottom of
the waveform display area.
• To stop waveform acquisition, click the stop button at the bottom of
the waveform display area.
See figure 3-27.
You can still use the Run and Stop keys on the front panel while the graphical
interface is enabled. However, if you are performing many graphical interface
operations, it is easier to start and stop the oscilloscope using the buttons in the
interface, so you do not have to remove your hand from the mouse.
Figure 3-27
Click this button
to start waveform
acquisition
Start and Stop Icons
Click this button
to stop waveform
acquisition
Using the Oscilloscope
To start and stop waveform acquisition
3-37