About This Guide; Audience; How To Use This Guide - 3Com CoreBuilder 5000 User Manual

Audience

How to Use This
Guide
A T
BOUT
This guide explains how to install 3Com CoreBuilder 5000 12-Port
100BASE-TX Workgroup FastModules, manage100BASE-TX Workgroup
FastModules using the 3Com
Management Module, and monitor network traffic.
If the information in the release notes shipped with your product differs
from the information in this guide, follow the release note instructions.
This guide is intended for the following people at your site:
Network manager or administrator
Trained hardware installer or service personnel
the following table shows the location of specific information.
Table 1

How to Use This Guide

If you are looking for:
Information about 100BASE-TX Workgroup FastModule
features and benefits.
Information about designing and expanding the network and
using module workgroups.
Information about unpacking and installing the module.
Information about configuring the module.
Information about verifying LED and network operation.
Understanding and troubleshooting using front panel LEDs.
Specification for the 100BASE-TX Workgroup FastModule.
Information about getting technical support.
G
HIS UIDE
®
CoreBuilder 5000 Distributed
Turn to:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 4
Chapter 5
Appendix A
Appendix B