Updating The Phone Firmware - Gigaset C530 IP Manual

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 25.03.2015
Assigning a send connection
Prerequisite: You have configured at least one VoIP connection on your phone.
v Ï
¤ ¤
A list of handsets is displayed.
q
¤
Select the handset that should be assigned a new send connection.
r
¤
Choose a connection as the send connection. All configured connections are offered
with the names you have set.
If more than one connection is configured, Sel. at each call is also offered. For each call, you can
then select a connection over which the relevant conversation should be established.
The Gigaset.net connection is not included in the selection for the send connections.
Gigaset.net numbers (suffix #9) are automatically dialled via Gigaset.net.
Note
If the send connection on a handset is deleted or deactivated, the fixed line network
connection is assigned to it as the send connection.
Assigning receive connection(s)
Prerequisite: Several connections are configured for your phone.
v Ï
¤ ¤
The internal participants (handsets) are displayed.
q
¤
Select the internal participants that should be assigned new receive connections.
All configured connections and the Gigaset.net connection are displayed.
r
¤
Select Yes if you want the relevant connection to be the receive connection for the
internal participant. Select No if it should not be the receive connection. s
¤
¤
Repeat the steps for each connection.
Notes
u
If a new connection is configured, it is assigned as the receive connection to all internal
participants and answer machine Answer Machine 1.
u
If a connection is not assigned as the receive connection to any internal participant, calls
on this connection will not be signalled.

Updating the phone firmware

If necessary, you can update your phone's firmware.
The firmware update is downloaded directly from the Internet by default. The relevant web page
is preconfigured in your phone.
Prerequisite:
u
The phone is connected to the Internet (i.e. connected to a router,
u
The phone is in idle status i.e. no calls are being made, there is no internal connection
between the registered handsets, the base menu is not open in any of the handsets.
¤ q Telephony ¤
OK
¤
¤ ¤
q Telephony
OK
Switch to the next connection.
¤ q Send Connections
OK
Save
¤
q Rec. Connections
¤
Save
Configuring the system settings
¤
OK
¤
OK
OK
¢
page 12).
¤
OK
55