Configuring The System Settings - Gigaset C530 IP Manual

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 25.03.2015

Configuring the system settings

You can make the following settings via the menu on the relevant handset or on a registered
Gigaset C530H, E630H, C620H, S820H, SL910H, SL930H handset or via the Web configurator on
the phone.
Setting the date and time manually
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar,
the date and time must be set.
Note
The address of a time server on the Internet is stored on your phone. The date and time are
taken from this time server provided that the phone is connected to the Internet and
synchronisation with the time server is activated. Manual settings are overwritten in this
case.
If the date and time have not yet been set on the handset, the display key Time appears.
¤
Press the display key Time.
Or:
v Ï
¤ ¤
¤
Date:
Q 42Q
Enter the month, day and year in 8-digit format, e.g.
¤
Time: QM 5 Enter hours and minutes in 4-digit format,
e.g.
¤
Switch between am and pm if applicable with the display key am/pm.
¤
Save
Changing the system PIN
Protect the system settings of your phone with a PIN known only to you. You have to enter the
system PIN if you register or de-register a handset, change local network settings, perform a
firmware update or reset the phone to default settings.
You can change the 4-digit system PIN of the base (default setting: 0000).
v Ï
¤
necessary.
¤ q Date/Time
OK
for 07.15.
¤ ¤ ¤
q System
OK OK
¤ ¤
OK Enter the new system PIN.
¤
OK
for 01/14/2011.
¤ ¤
q System PIN
OK
¤
OK
Configuring the system settings
¤
Enter the current system PIN if
51