Gigaset C530 IP Manual page 20

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / starting.fm / 25.03.2015
Please note ...
... when entering access data, it is case sensitive.
¤
To switch between upper/lower case and digit input:
times if required). You can see briefly in the display whether upper case, lower case or
digit input is selected.
¤
To delete incorrectly entered characters:
the left of the cursor is deleted.
¤
To navigate within an input field:
If you have entered all the VoIP data fully and correctly, the message "Your IP account is
registered at your provider." will be shown in the display shortly afterwards. The VoIP wizard
will then close.
The connection wizard starts.
Connection wizard
Use the connection wizard to assign previously configured connections (fixed line network
connection, Gigaset.net connection
internal participants as receive or, if applicable, as send connections. Internal participants are the
registered handsets.
u
Receive connections are the phone numbers (connections) on which you can be called.
Incoming calls are only forwarded to the internal participants (end devices) for which the
relevant connection is assigned as a receive connection.
u
Send connections are the numbers that are sent to the called participant. The network
provider calculates charges based on the send connections. You can assign each internal
participant a number or the associated connection as a send connection.
u
Each connection (number) of your phone can be both a send as well as a receive connection.
You can assign each connection to several internal participants as a send and/or receive con-
nection.
Default assignment
All configured connections are assigned as receive connections at registration/start-up.
The fixed line network connection is assigned to the handsets as a send connection.
¤
Press the display key
¤
Press the control key
¢
page 35 and the VoIP connections
Getting started
#
¤
Press the key (multiple
Ñ
. The character to
r
.
¢
page 14) to the
19