Questions And Answers - Gigaset C530 IP Manual

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / appendix.fm / 25.03.2015

Questions and answers

If you have any queries about the use of your telephone, suggested solutions are available on
our website at
www.gigaset.com/service
The table below also lists steps for troubleshooting.
The display is blank.
1. The handset is not activated.
¥
Press and hold a.
2. The battery is empty. ¥
Charge the battery or replace it (
3. The key and display lock is activated. ¥
Press and hold the hash key
4. The backlight is deactivated because a time control was activated ( ¥
Press any key on the handset to temporarily activate the display backlight.
Or:
¥
Deactivate time control (
" "
No Base
1. The handset is outside the range of the base. ¥
Move the handset closer to the base.
2. The base is not activated.
¥
Check the base power adapter.
3. The base's range is reduced because ECO DECT is activated.
¥
Deactivate Eco Mode (
4. The firmware is currently being updated.
¥
Please wait until the update is complete.
"Please register handset" or "Place handset in base" flashes on the display.
The handset has not been registered or was de-registered due to the registration of an additional handset
(more than six DECT registrations).
¥
Register the handset again (
The handset does not ring.
1. The ringtone is deactivated. ¥
Activate ringtone (
2. Call Forwarding is set to "All calls". ¥
Deactivate call divert (
3. The connection on which the call is received is not assigned to the handset as a receive connection.
¥
Change the assignment of receive connections (
You cannot hear a ringtone/dialling tone from the fixed line network.
The supplied phone cable is not being used or the phone cable may be faulty. ¥
Replace the phone cable. When purchasing from a phone retailer, ensure the cable has the correct jack
pin connections (
Some of the network services do not work as specified.
Features are not activated.
¥
Query with the network provider.
120
¤ ¤
FAQ
#
¢
page 47).
flashes on the display.
¢
page 86) or reduce the distance between the handset and base.
¢
page 69).
¢
page 47).
¢
page 38).
¢
page 131).
First steps for troubleshooting.
¢
page 10).
.
¢
page 55).
¢
page 45).