4-2. Driving Procedures - Lexus NX300h Owner's Manual

Selecting shift ranges in the D
position
To drive using temporary shift range
selection, operate the "-" paddle shift
switch while the shift lever in D. Chang-
ing the shift range enables the level of
engine braking force to be selected.
The shift range can then be selected by
operating the "-" and "+" paddle shift
switches.
1 Upshifting
2
Downshifting
The selected shift range, from 1 to 6, will be
displayed on the multi-information display.
The initial shift range is 4 when the "-" pad-
dle shift switch is operated.
To return to normal D position driving, the
"+" paddle shift switch must be held down
for a period of time.
Shift ranges and their functions
■
 You can choose from 6 levels of
engine braking force.
 A lower shift range will provide
greater engine braking force than a
higher shift range, and the engine
revolutions will also increase.
When the "-" paddle shift switch is oper-
■
ated with the shift lever in the D position
A shift range will be automatically selected.
LEXUS NX300h
al_USA_OM78212U
Owners Manu-

4-2. Driving procedures

The highest gear of the first shift range will
be one gear lower than the gear in use
during normal D position driving.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time
When the shift lever is shifted to a posi-
●
tion other than D
Selecting shift ranges in the S
position
To enter S mode, shift the shift lever to
S. Shift ranges can be selected by
operating the shift lever or paddle shift
switches, allowing you to drive in the
shift range of your choice. The shift
range can be selected by operating the
shift lever or the "-" and "+" paddle shift
switches.
1
Upshifting
175
4