Lexus NX300h Owner's Manual page 87

Hide thumbs Also See for NX300h:
Table of Contents

Advertisement

sway warning are met. (→P.211)
Display off
A blank screen is displayed
Tire inflation pressure
It may take a few minutes to display the
tire inflation pressure after the power
switch is turned to ON mode. It may also
take a few minutes to display the tire infla-
tion pressure after inflation pressure has
been adjusted.
"---" may be displayed if the tire informa-
tion cannot be determined due to unfa-
vorable radio wave conditions.
Tire inflation pressure changes with tem-
perature. The displayed values may also
be different from the values measured
using a tire pressure gauge.
When disconnecting and reconnecting
12-volt battery terminals
The drive information will be reset.
Navigation system-linked dis-
play (if equipped)
Select to display the following naviga-
tion system-linked information.
 Route guidance
 Compass display (north-up display/
heading-up display)
Audio system-linked display (if
equipped)
Select to enable selection of an audio
source or track on the display using the
meter control switches.
Driving assist system information
Select to display the operational status
of the following systems:
LEXUS
NX300h
al_USA_OM78212U
Owners
Manu-
2-1. Instrument cluster
 LDA (Lane Departure Alert with
steering control) (→P.210)
 Dynamic radar cruise control with
full-speed range (→P.217)
The displayed icon changes depending
on the system used.
Warning message display
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (→P.374)
Settings display
The settings of the following items can
be changed using the meter control
switches.
For functions that can be enabled or
disabled, the function switches
between on and off each time
pressed.
LDA (Lane Departure Alert
with steering control) (→P.210)
Select to set up the following items.
 Steering Assist
Select to enable/disable steering wheel
assistance.
 Alert
Select to set a vibrator or buzzer as the
notification method used to warn the
driver.
 Alert sensitivity
Select to set the warning sensitivity.
 Sway warning
Select to enable/disable the vehicle sway
87
2
is

Advertisement

Table of Contents
loading

Table of Contents