Lexus NX300h Owner's Manual page 427

Power back door
■
Function
Set at the desired Position

*2
(height)
Back Door Automatic Open
and Stop Position
5 step configuration

Back Door Automatic Open
and Stop Position
Back door opener switch
operations
Power back door operations
Operation buzzer volume
*1, 4
Kick Sensor
*1
: If equipped
*2
: Configured by operating the
*3
: While carrying the electronic key on your person, press the back door opener switch.
*4
: When the towing hitch is installed, the kick sensor does not work
Vehicle customization
■
When the speed linked door locking function and shift position linked door locking func-
●
tion are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all the doors locked, the speed linked door locking function
would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking function will
operate.
● When the smart access system with push-button start is off, smart door unlocking cannot
be customized.
When the doors remain closed after unlocking the doors and the automatic door lock
●
function is activated, the signals will be generated in accordance with the Operation sig-
nal (buzzer) and the Operation signal (emergency flashers) settings.
■ In the following situations, customize mode in which the settings can be changed
through the multi-information display will automatically be turned off.
A warning message appears after the customize mode screen is displayed.
●
● The power switch is turned off.
LEXUS NX300h
al_USA_OM78212U
*1
(→P.110)
Default setting
Initial settings
Position
5
When the back
door is locked
On
3
On
switch of the lower back door. (→P.120)
Owners Manu-
8-2. Customization
Customized set-
A
ting
Stop at the
desired position —
(height)
1 to 5 O
When the back
—
*3
door is unlocked
Off —
1
—
2
Off —
427
B C D
— — O
— — —
— O —
O — —
O — —
O — —
8