Lexus NX300h Owner's Manual page 188

188
4-3. Operating the lights and wipers
NOTICE
Do not install a parking tag or any
●
other accessories near or around the
camera sensor.
● Do not overload the vehicle.
● Do not modify the vehicle.
Do not replace windshield with non-
●
genuine windshield.
Contact your Lexus dealer.
Changing to manual control
mode
Switching to low beam
■
Pull the lever to original position.
The Automatic High Beam indicator will
turn off.
Push the lever away from you to activate
the Automatic High Beam system again.
Switching to high beam
■
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Automatic
High Beam system again.
LEXUS NX300h
al_USA_OM78212U
Owners Manu-