Lexus NX300h Owner's Manual page 251

PCS (Pre-Collision System)
■
→P.203
BSM (Blind Spot Monitor) (if
■
equipped)
→P.241
■ When the TRAC/VSC/ABS/Trailer
Sway Control systems are operating
The slip indicator light will flash while the
TRAC/VSC/ABS/Trailer Sway Control
systems are operating.
Disabling the TRAC system
■
If the vehicle gets stuck in mud, dirt or snow,
the TRAC system may reduce power from
the hybrid system to the wheels. Pressing
to turn the system off may make it eas-
ier for you to rock the vehicle in order to
free it.
To turn the TRAC system off, quickly press
and release .
The "Traction Control Turned Off" will be
shown on the multi-information display.
Press again to turn the system back on.
LEXUS NX300h
al_USA_OM78212U
4-5. Using the driving support systems
Owners Manu-
■ Turning off both TRAC, VSC and Trailer
Sway Control systems
To turn the TRAC, VSC and Trailer Sway
Control systems off, press and hold
more than 3 seconds while the vehicle is
stopped.
The VSC off indicator will come on and the
"Traction Control Turned Off" will be shown
on the multi-information display.
Press again to turn the systems back on.
*
: On vehicles with pre-collision system,
pre-collision brake assist and pre-colli-
sion braking will also be disabled. The
PCS warning light will come on and the
message will be shown on the multi-infor-
mation display. (→P.210)
When the message is displayed on the
■
multi-information display showing that
TRAC has been disabled even if
not been pressed
TRAC cannot be operated. Contact your
Lexus dealer.
Sounds and vibrations caused by the
■
ABS, brake assist, VSC, Trailer Sway
Control, TRAC and hill-start assist con-
trol systems
A sound may be heard from the engine
●
compartment when the brake pedal is
depressed repeatedly, when the hybrid
system is started or just after the vehicle
begins to move. This sound does not indi-
251
4
for
*
has