Setting Up A Network; Ethernet; Usb - ActionTec GT724-WG User Manual

54 mbps wireless dsl gateway

Hide thumbs Also See for GT724-WG:

Table of Contents

Setting Up a Network

Other computers can be connected to the Gateway to form a network, which allows the computers to

transfer files, communicate with each other, and share an Internet connection. The networked computers

can be connected to the Gateway in three ways: Ethernet,

1. Insert the Installation

automatically. Wait until the following screen appears, read the on-screen instructions, then click Next.

2. Read the instructions, select Adding Computers by clicking on the appropriate check box, then click

Next.

3. Select Ethernet, then click Next.

73 Chapter 7 Setting Up a Network

4. When the next window appears, get the yellow Ethernet cable from the Quick Start Kit, then click Next.

5. Plug one end of the yellow Ethernet cable into one of the open yellow ports on the back of the

Gateway, then click Next.

74 Actiontec 54 Mbps Wireless DSL Gateway User Manual

6. Plug the other end of the yellow Ethernet cable into an Ethernet port on the back of the computer,

then click Next.

Note: An Ethernet port looks similar to a phone port, but is slightly bigger.

7. Make sure one of the Ethernet lights glows steadily green, then click Next.

75 Chapter 7 Setting Up a Network

8. A series of congratulations windows appears. Click through them to exit the Installation Buddy.

The computer is connected to the Gateway via Ethernet. To connect more computers to the Gateway via

Ethernet, repeat this procedure.

76 Actiontec 54 Mbps Wireless DSL Gateway User Manual

in the

drive of the computer. The Installation Buddy starts

CD-ROM

Actiontec 54 Mbps Wireless DSL Gateway User Manual

, or wirelessly.

USB

Table of Contents