ActionTec GT724-WG User Manual page 31

The physical environment around the Gateway can have a varying effect on wireless signal strength and
quality. The more dense an object, the greater the interference. Concrete or metal reinforced structures
will cause a higher degree of signal loss than those made of wood, plaster, or glass.
I have an Apple computer that uses the Airport wireless device. Is this device compatible with
the Gateway?
Yes, the Apple Airport system complies with the 802.11b and 802.11g standards. If you use the
WEP
security feature, refer to the Apple Airport documentation for information on the proper method to enter
the key for compatibility with the Gateway's hexadecimal entry.
WEP WEP
Network
I use my laptop at work and at home. Is there something special I need to do to make it work in
both places?
Yes. You must reconfigure your network settings, including Workgroup, Domain, Password, User name,
IP addressing, and any other specific settings used by your company. You may also use third-party
software like NetSwitcher to automatically switch between different configurations.
What is the valid IP range I can use for my home network?
The valid range for the Gateway is 192.168.0.2 to 192.168.0.254 by default.
IP
How do I find out which IP address my computer is using?
Windows 98, 98SE, and Me - Select Start, Run, and type
. Press Enter. When the
winipcfg
"Winipcfg" window appears, ensure your network device is selected.
Windows NT, 2000, and XP - Select Start, Run and type
. Press Enter. When the command
cmd
screen is displayed, type and press Enter.
ipconfig
85 Chapter 8 Troubleshooting
I used DHCP to configure my network. Do I need to restart my computer to refresh my IP
address?
No. Select the appropriate operating system, below, and follow the steps to refresh your address.
IP
Windows 98, 98SE, and Me - Go to Start, Run, type , and press Enter. Ensure the
winipcfg
Ethernet adapter is selected in the device box. Press the Release_all button, then press the Renew_all
button.
Windows NT 4.0 and 2000 - Go to Start, Run, type
, and press Enter. At the DOS prompt type
cmd
, then type . (Note the space after .)
ipconfig /release ipconfig /renew ipconfig
Windows XP - Unplug the Ethernet cable or wireless card and plug it back in.
Can I run an application located on another computer over the network?
Yes, if the application is designed to run over a network.
Can I play games between computers on my network, or on the Internet?
Yes, if the games were designed for multi-player or play. For specific information about whether a
LAN
game is capable of Internet or play, refer to the game documentation. Some games require ports to
LAN
be forwarded to host or join games over the Internet.
I have an FTP or Web server on my network. How can I make it available to users on the
Internet?
31