Services Blocking; Website Blocking; Remote Management - ActionTec GT724-WG User Manual

Domain Name
"Domain Name" allows a network administrator to enter a domain name if the network is being used in a
domain environment.
DNS (Dynamic or Static)
These options designate the type of
information, select the type here. If not, leave as is.
DNS Server 1
"DNS Server 1" is the primary
information, enter it here. If not, leave the text box intact.
DNS Server 2
"DNS Server 2" is the secondary
information, enter it here. If not, leave the text box intact.

Services Blocking

Selecting Services Blocking in the "Advanced Configuration" screen generates the "Services Blocking"
screen.
45 Chapter 4 Using Advanced Setup
To modify Internet privileges (Web,
1. Enter the computer's IP address in the
2. Select the Internet service(s) to be blocked.
3. Click Add to enter the computer's IP address in the "Blocked IP Address List" text box.
4. To remove blocked services, select the computer's IP address in the "Blocked IP Address List" text box
and click Remove.

Website Blocking

Selecting Website Blocking in the "Configuring the Advanced Settings" screen generates the "Website
Blocking" screen. This feature enables the Gateway to block Web sites to all computers on the network. To
block a Web site, enter the address of the Web site in the "Website" text box and click Add. The blocked
Web site address is displayed in the "Blocked Website List" text box, and will not be available to
computers on the network. To remove a blocked Web site, click on it in the "Blocked Website List," then
click Remove. Website Blocking supports blocking up to 50 Web sites.
46 Actiontec 54 Mbps Wireless DSL Gateway User Manual

Remote Management

Selecting Remote Management in the "Configuring the Advanced Settings" screen generates the "Remote
Management" screen. Remote Management allows access to the Gateway through the Internet via another
computer. Actiontec recommends leaving the Remote Management Off (the factory default setting).
To access the Gateway from the Internet, activate Remote Management by selecting On and writing down
the address of the Gateway (see "
WAN IP
Web browser and enter the Gateway's
prompt appears in the browser window. Enter the username and password in the appropriate text boxes to
access the Gateway.
server provided by the
DNS
server provided by the
DNS
provided by the
DNS ISP
FTP , Newsgroups, etc.) for the computers on the network:
Address: text box.
IP
Address"). On a computer outside of the network, open a
WAN IP
address in the address text box. A username and password
WAN IP
. If the provided
ISP ISP
. If the provided
ISP ISP
. If the provided secondary
ISP
server
DNS
server
DNS
server
DNS
17