ActionTec GT724-WG User Manual page 47

2. When the " " window appears, select Edit from menu bar, then select User Mode.
TCP/IP
3. When the "User Mode" window appears, select Advanced, then click
4. In the " " window, select Ethernet from the "Connect via" drop-down list.
TCP/IP
5. Select Using
Server from the "Configure" drop-down list.
DHCP
6. Ensure the "Use 802.3" option is not checked.
7. Disregard any addresses in the
is made.
8. Click Options and when the "
when needed" option is not checked, then click
9. Close the "
" window and when prompted to save changes, click Save.
TCP/IP
10. Restart the computer. The
To finish setting up the computer to connect with the Gateway, follow the instructions in chapter 3,
"Performing a Basic Setup," on page 33.
117 Appendix f Non-Windows Setup
OS X
1. From the Apple Menu, select System Preferences.
2. When the "System Preferences" window appears, click Network.
118 Actiontec 54 Mbps Wireless DSL Gateway User Manual
3. The Network window appears. Select Built-In Ethernet from the "Show" drop-down list.
4. Select TCP/IP and, from the "Configure" drop-down list, select Using
5. Click Apply Now and close the "System Preferences" application. The
To finish setting up the computer to connect with the Gateway, follow the instructions in chapter 3,
"Performing a Basic Setup," on page 33.
Notices
Actiontec 54 Mbps Wireless DSL Gateway User Manual
Address text boxes. They will be reacquired when the first connection
IP
Options" window appears, select Active. Ensure the "Load only
TCP/IP
settings are configured.
TCP/IP
115
116
OK
.
OK
DHCP
TCP/IP
.
.
settings are configured.
f
47