Activating A Flight Plan Leg - Garmin G950 Pilot's Manual

ACTIVATING A FLIGHT PLAN LEG

The G950 allows selection of a highlighted leg as the "active leg" (the flight plan leg which is currently used
for navigation guidance).
Activating a flight plan leg:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the destination waypoint for the desired leg.
3) Press the ACT LEG Softkey (MFD only); or press the MENU Key, highlight 'Activate Leg', and press the ENT Key.
A confirmation window is displayed with 'ACTIVATE' highlighted.
4) Press the ENT Key to activate the flight plan leg. To cancel, press the CLR Key, or highlight 'CANCEL' and press
the ENT Key.
5) Press the FMS Knob to remove the flashing cursor.
190-01146-00 Rev. A
Figure 5-81 Active Flight Plan Page - Selecting the Leg Destination Waypoint
Garmin G950 Pilot's Guide for the Tecnam P2006T
FLIGHT MANAGEMENT
Current
Active Leg
Selected Destination
Waypoint
Activate Leg Softkey
209