Terrain Proximity Page - Garmin G950 Pilot's Manual

HAZARD AVOIDANCE
Additional information about obstacles can be displayed by panning over the display on the map. The map
panning feature is enabled by pressing the RANGE Knob. The map range is adjusted by turning the RANGE
Knob. If the map range is adjusted while panning is enabled, the map is re-centered on the Map Pointer.
Additional
Information on
Obstacle Selected
with Map Pointer
Red Terrain Area
(Above or Within
100' Below Aircraft
Altitude)
Red Lighted
Obstacles
(Above or Within
100' Below Aircraft
Altitude)

TERRAIN PROXIMITY PAGE

The Terrain Proximity Page is specialized to show terrain and obstacle data in relation to the aircraft' s current
altitude, without clutter from the basemap. Aviation data (airports, VORs, and other NAVAIDs) can be displayed
for reference.
Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available
relative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the RANGE Knob from 1 to 200 nm, as indicated by the map range rings (or arcs).
Displaying the Terrain Proximity Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain Proximity Page.
3) To change the view,
a) Press the VIEW Softkey.
b) Press the 360 or ARC Softkey to select the desired view.
Or :
a) Press the MENU Key.
b) Select 'View Arc' or 'View 360º' (choice dependent on current state) and press the ENT Key to change the view.
272
Figure 6-5 Terrain Information on the Navigation Map Page
Garmin G950 Pilot's Guide for the Tecnam P2006T
Lighted Obstacle
Selected with Map
Pointer
Yellow Terrain Area
(Between 100' and
1000' Below Aircraft
Altitude)
Terrain Display
Enabled Icon
Terrain Legend
190-01146-00 Rev. A