Parameters: Access Levels + Password - Siemens SINAMICS Configuration Manual

Security measures for SINAMICS
5.4 Using the memory card
Parameter
r7758[0...19]
p7759[0...19]
r7760
p7763
p7764[0...n]
p7765
p7766[0...29]
p7767[0...29]
p7768[0...29]
p7769[0...20]
r7843[0...20]
5.3

Parameters: Access levels + password

The SINAMICS parameters are divided into access levels 0 to 4. With the aid of the access
levels, you can specify which parameters can be modified by which user or input/output device.
Parameters of access level 4 are password-protected and only visible for experts.
The converter List Manual specifies in which access level the parameter is displayed and can
be changed.
Further information
You can find detailed information on this topic in chapter "Access protection and rights
(Page 59)" and in the List Manual of the converter in chapter "Explanations for the list of
parameters".
5.4 Using the memory card
The memory card must be handled with particular care for all SINAMICS devices that use a
memory card so that no malicious software or erroneous parameterizations are spread
between different commissioning PCs or inverters.
Risk of death due to software manipulation when using exchangeable storage media
Storing files onto exchangeable storage media amounts to an increased risk of infection of
the commissioning PCs, e.g. with viruses or malware. Incorrect parameter assignment can
cause machines to malfunction, which can lead to injuries or death.
● Protect files stored on exchangeable storage media from malicious software using
48
WARNING
appropriate protection measures, e.g. virus scanners.
Function
KHP Control Unit serial number
KHP Control Unit reference serial number
Write protection / know-how protection status
KHP OEM exception list number of indices for p7764
KHP OEM exception list
KHP configuration
KHP password input
KHP password new
KHP password confirmation
KHP memory card reference serial number
Memory card serial number
Configuration Manual, 08/2017, A5E36912609A
Industrial Security