Fujitsu ARROWS NX F-01K Instruction Manual page 41

◆ How to use Exlider
Trace Exlider (P) to scroll the screen or zoom in.
･
For setting of Exlider, refer to "Exlider settings".→P163
❖
Notes on using Exlider
･
In the following cases, this function does not work.
- In emergency mode
- When Slide in launcher is displayed
- In Split screen
- When receiving a call
- When registering a fingerprint, while authenticating with
fingerprint
･
Depending on application, the scroll mode may not be
available while a still image is displayed, etc.
･
While the slide display is displayed, the scroll mode may not
be available depending on a location where your finger is
moved to.
❖
Operating
When this function is ON, the scroll mode is available. Double-
tap Exlider (P) to switch to the magnification mode. To switch
to the scroll mode, in the magnification, double-tap Exlider
(P), switch the screen, or exit the application.
■ Scroll mode
To scroll, slide Exlider (P) up or down and keep touching.
･
Scroll is available until you release your finger.
･
You can set the scroll operation to "No change in speed" or
"Change speed" in Action setting. When "Change speed" is
set, set the scroll speed.→P163
■ Magnification mode
Zoom in center of screen : Double-tap Exlider (P) (Zoom in)→
Slide Exlider (P) up or down (Change the magnification of the
screen)
Specify the portion of the screen to zoom in : Double-tap
Exlider (P) (Display magnification frame)→Slide Exlider (P)
up or down (Move the magnification frame to a desired
portion)→Tap Exlider (P) (Zoom in)→Slide Exlider (P) up or
down (Change the magnification of the screen)
✔INFORMATION
･
To check the explanation of Exlider, from the Home screen,
→[Settings]→[Useful tools]→[Exlider settings]→
[Function description].→P163
◆ Switching the portrait/landscape view
With the motion sensor which detects orientation or
movement, you can switch the screen display by tilting the
terminal vertically or horizontally (Auto-rotate screen→P137).
･
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
･
Alternatively, you can set with "Auto-rotate" in the Panel
switch (→P53).
39
Before using the terminal