Fujitsu ARROWS NX F-01K Instruction Manual page 133

◆ Wi-Fi sleep policy
Set whether to disconnect Wi-Fi when the screen of the
terminal turns off or while charging.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[CONFIGURE]→[Wi-Fi sleep policy]→Select the
item
◆ Advanced Wi-Fi settings
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Advanced]
3
Set each item
Install certificates : Install certificates.
Wi-Fi Direct : Setting steps→P129
Easy Settings : Setting steps→P128
Multi-connection : Setting steps→P129
Wi-Fi Auto ON/OFF : Setting steps→P130
Wi-Fi optimization : Set whether to reduce the battery
consumption when the Wi-Fi is On.
auto-IP : Set whether to enable auto-IP function.
･
Setting is not available when the Wi-Fi is On.
→[Settings]→
→[Settings]→
131
◆ Configuring Wi-Fi
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]→
[CONFIGURE]
2
Set each item
Saved networks : Saved Wi-Fi networks are displayed.
Network notification : Set whether to notify when a Wi-Fi
open network is available.
･
Setting is not available when the Wi-Fi is Off.
Wi-Fi sleep policy : Setting steps→P131
MAC address : MAC address is displayed.
IP address : Display the IP address.
→[Settings]→
Settings