Turning Power On/Off - Fujitsu ARROWS NX F-01K Instruction Manual

Turning power on/off

◆ Turning power on
･
Before turning on the power, make sure that there is no gap
between the terminal and the slot cap.
Press and hold P (2 sec. or more) until the
1
indicator LED lights in green
The terminal vibrates and the lock screen appears
following the startup screen.
･
For the first activation, make initial settings.→P48
2
Unlock the screen lock
･
For unlocking method for screen lock, refer to
"Unlocking screen lock".→P54
◆ Turning power off
Press and hold P until the phone options menu
1
appears
･
In the options menu, the following items are displayed.
Power off : Turn the terminal OFF.
Restart : The terminal will restart.
Airplane mode : Turn the Airplane mode ON/OFF.→
P133
Manner mode/Manner mode (Silent)/Manner mode
(Alarm) : Turn the Manner mode ON/OFF.→P141
Emergency mode : Turn the Emergency mode ON/OFF.
→P40
2
[Power off]→[OK]
The terminal turns off vibrating.
Basic operation
◆ Using touch panel
Touch the touch panel directly to operate the terminal.
❖
Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
･
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
- Operation under water
37
Before using the terminal